Premium 17mm hardwood formply with phenolic film for smooth concrete finishes. Durable, water-resistant, and reusable.
The ProSolve pig tail post is a quick, no-fuss way to set up temporary boundaries and fencing. Lightweight, easy to push into the ground, and fitted with a looped top to hold tape or rope in place.
Simple. Quick. Does what it’s there for.
ProWeb Geocell is a 3D structure manufactured in a honeycomb format to help stabilise weak ground. it is used to strengthen roads and sloes, preventing erosion especially on soft soil areas or where rainfall is high.
Supplied in a compressed sheet for easy transportation, then simply pull to expand when onsite.
F17 Structural Formply (2400x1200x17mm). High-strength hardwood core with phenolic film for smooth concrete finishes.
An ECO friendly water-based marking paint formulated for application on concrete, tarmac, wood and composites.
The ProSolve pedestrian barrier is a galvanised steel barrier designed for controlled pedestrian management across construction sites, roadworks, and public environments where separation is required. Measuring 2260mm in length, 1100mm in height, and 490mm in width including feet, and weighing 12kg, it offers a stable, familiar format. Built with a 25mm outer frame and 16mm uprights spaced at 100mm, it reflects standard, proven design.
Simple. Reliable.
We think this is the best pedestrian barrier on the market today.
The ProSolve pedestrian barrier is a galvanised steel barrier designed for controlled pedestrian management across construction sites, roadworks, and public environments where separation is required. Measuring 2260mm in length, 1100mm in height, and 490mm in width including feet, and weighing 12kg, it offers a stable, familiar format. Built with a 25mm outer frame and 16mm uprights spaced at 100mm, it reflects standard, proven design.
The ProSolve speed humps are a straightforward traffic calming solution designed to slow vehicles without overthinking the job. Each unit measures 500mm long, 400mm wide, and 50mm high, which is enough to reduce speed without being excessive. It’s a simple format that works.
That’s the point.
The ProSolve speed humps are a straightforward traffic calming solution designed to slow vehicles without overthinking the job. Each unit measures 500mm long, 400mm wide, and 50mm high, which is enough to reduce speed without being excessive. It’s a simple format that works.
The ProSolve speed hump end caps are designed to finish off a run of speed humps properly, without leaving exposed edges or abrupt ends where they don’t belong. Each unit measures 250mm long, 400mm wide, and 50mm high, creating a clean and consistent transition. It’s a small component. Still necessary.
The ProSolve speed hump end caps are designed to finish off a run of speed humps properly, without leaving exposed edges or abrupt ends where they don’t belong. Each unit measures 250mm long, 400mm wide, and 50mm high, creating a clean and consistent transition. It’s a small component. Still necessary.
The ProSolve rollout speed hump is a portable solution for temporary speed control where fixing into the ground isn’t always practical or necessary. At 3 metres long, 230mm wide, and 50mm high, it provides consistent coverage across the lane. The rubber backing helps it grip the surface, and it comes in a zip-up carry bag for easy transport between sites.
Simple setup. Easy to move.
